Gutter installation in Scranton.
New gutters sized to the roof they drain and hung with a slight slope, so water runs to the downspouts instead of over the edge. We put in seamless aluminum, copper and galvanized steel, in K-style or half-round.
Get free quote
Licensed and insured
Registered in Pennsylvania, PA HIC #PA214278.
A crew for each trade
Roofers on your roof, gutter crews on your gutters.
Open 24/7
Call or text any hour, for an emergency or a quote.
Recent work
Real homes. Real jobs.
One job a card: before and after, the town, and what we did. Open one to see the whole job.
- Drums, PA
Seamless Gutters in Drums
Rotted old gutters against the stone replaced with seamless gutters made on site, new downspouts and steel mesh guards. 11 photos See the project - Freeland, PA
Roof Replacement in Freeland
Old shingles off to the boards and a new roof on, the chimney crown rebuilt, then seamless gutters with guards. 12 photos See the project - Drums, PA
Gutter Cleaning in Drums
Gutters packed with leaves and black sludge, under the guards and in the open runs, emptied by hand and cleared to drain. 7 photos See the project
Reviews
What neighbors say.
Recommendations from our neighbors on Nextdoor, in their own words.
We recently used Atlas for a full roof replacement and we couldn't be more thankful. … The crew worked fast, efficiently and left everything spotless when the job was done. We're already looking forward to having our gutters replaced in a few weeks. If you have a chance to work with this company I highly recommend them. Thank you again to the whole team for all your help.
T. B. Bloomsburg, PA Communication was clear from day one. They showed up on time, kept the site clean, sent photos updates and stuck to the quoted price. … Best contractor experience we've had in the area. Highly recommended
S. K. Drums, PA Their most recent job involved replacing some old wood paneling with wallpaper. They were done in a few hours and the wall looks fantastic. I can't recommend them highly enough.
R. V. Drums, PA Nice job cleaning the gutters
K. K. Drums, PA
What to look for
Signs it is time for new gutters.
Most of these you can see from the yard.
- Water pouring over the front edge in an ordinary rain
- Leaks at nearly every seam and corner, not just one
- Long sections bent, twisted or pulling off the house
- Rust spots or holes worn through the bottom
- Rot or peeling paint on the boards behind the gutter
- A trench worn into the soil below the roof edge
Gutter installation planned around your roof

Before we measure a single run, we look at how much roof drains into each gutter, how steep it is, and where the water should end up on the ground. That tells us the gutter size, how many downspouts you need and where they belong. We also check the boards the gutters hang on. If they are soft or rotted, we replace them first, because a new gutter fastened to rotten wood will not stay put through its first winter.
Seamless gutter installation and choosing a size

Seamless gutters are formed from one continuous piece of metal for each run of the roof, so the only joints are at the corners and the downspout outlets. Fewer joints means fewer places to drip, and nothing along the run for leaves to snag on. We size them to the roof, not to whatever was there before. The size is the width across the top of the gutter: bigger roofs and steeper pitches shed more water, faster, and need a wider gutter to catch it.
5 inch gutters
The most common size, and usually enough for a house with a roof of average size and slope. Five inch gutters fit most hangers and guards and pair with 2 by 3 inch downspouts. If the gutters you have now only spill over when they are clogged, this size is likely right for you.
6 inch gutters
A 6 inch gutter holds noticeably more water and pairs with bigger 3 by 4 inch downspouts. We suggest it for large roofs, steep roofs where rain comes off fast, long runs, and valleys that pour a lot of water into one spot. It also gives slush and melting snow more room before the gutter fills.
7 inch gutters
Seven inch gutters are for large or commercial roofs: a wide, low-slope roof on a business building, or a big roof where most of the water drains to one side. On a house they are rare. If your roof calls for them, we explain why before you decide.
Not sure which size or metal?
Text us a photo of the house and the gutters you have now. It helps us plan the visit, and the quote is free.
Seamless aluminum gutters for most homes

Aluminum is the usual choice for a house. It does not rust, it is light enough that the hangers are not fighting its weight, and it comes in a range of colors to match your trim. Formed seamless, it gives a clean, unbroken line along the roof edge. The tradeoff is that it can dent from a ladder leaned against it or a chunk of ice sliding off the roof, so we set the hangers close together to stiffen it.
K-style gutters, the shape on most houses
K-style is the shape you see on most homes. The flat back sits tight against the board behind it, and the front has a curved profile that looks like the crown molding along a ceiling. For the same width, a K-style gutter holds more water than a round one, which is why it is the standard shape for seamless aluminum. It suits nearly any roof, from a one-story ranch to a tall, steep house.
Half-round gutters for older homes
Half-round gutters are shaped like a pipe cut down the middle. They are the traditional look on many homes built in the early 1900s, and often the right pick when you want new gutters that suit an older house. They hang from brackets and drain through round downspouts. Because the rounded bottom holds a little less than a K-style gutter of the same width, we may go up a size on a steep roof. Half-round comes in aluminum, copper or steel.
Copper gutters and how they change color
Copper gutters start out bright, darken to brown as they weather, and slowly turn green over the years. They do not rust, and the joints are soldered rather than sealed with caulk. Copper costs more than aluminum or steel, so most people choose it for the look: on a stone or brick home, over a front porch, or on an older house where copper was there to begin with. If another metal would do the same job, we will tell you.
- Free quotes
- Licensed and insured
- PA HIC #PA214278
- Call or text
Galvanized steel gutters for a stronger gutter
Galvanized steel is steel coated in zinc to keep rust off. It is heavier and stiffer than aluminum, so it resists dents from ladders and holds its shape better under heavy wet snow. The catch is that once the coating wears through, usually where wet leaves sit for months, the steel starts to rust. Kept clean, it is a tough gutter. We often suggest it where snow slides off a steep roof and lands in the gutter hard.
Gutter replacement: when new makes more sense than fixing

One leaky corner or a sagging section is a repair. Gutter replacement makes sense when the problems are everywhere at once: rust through the bottom, seams leaking up and down the run, gutters too small for the roof, or old pieces patched so often that nothing lines up. Before we suggest it, we show you photos of what we found, marked up with arrows and notes, so you can see each problem for yourself. If a repair will do, we say so.
What goes into gutter installation cost

The price of new gutters depends on how many feet of gutter the house needs, the size and the metal, how many corners and downspouts there are, and how high and steep the roof is. Rotted boards behind the old gutters add to it, and so does taking the old ones down. Every house is different, so the quote is free and you get the price before any work starts. Nothing begins until you say yes.
How it works
How it works.
Four steps, from the first call to the finished job.
Call, text or send the form
Tell us what is going on. For an emergency, call any hour.
We take a look
We see the job for ourselves and photograph what we find before we put a number on it.
You get a free quote
A clear price for the work, and nothing starts until you say yes.
We do the work
Then we walk you through the finished job before we call it done.
Why us
The one you call.
A full team behind every job, and one person you can always reach while it is done.
One person with you, start to finish
From the signed contract to registering your warranty, you always have one of us to talk to.
A crew for each trade
Every trade has its own crew, with more than ten years in that trade. One crew doing everything is how mistakes happen.
A team of more than 30
Crews, project managers and an office behind every job, not one person with a truck.
Most of our customers come back
About three in four have hired us before. Once you call us for one job, you have someone for the next.
Photos of every job
Before and after photos on your own link, added as we work. We show you the problem.
Open 24/7
Call or text any hour. The same number takes texts, so you can send a photo of the problem.
Good to know
Common questions.
Can I install gutters myself?
You can, if you are comfortable on a tall ladder and have the tools to cut, seal and hang metal. Seamless gutters are harder, since they are formed by machine to the exact length of each run. The part most people get wrong is the slope: too flat and water sits, too steep and it looks crooked from the street.
How long does gutter installation take?
It depends on the size of the house, the gutter you choose and what we find behind the old ones. A large house, copper or half-round gutters, or rotted boards that need replacing first all add time. Your quote includes a time frame, so you know what to expect before we start.
How many hangers does 10 feet of gutter need?
Usually about five, one every two feet. Where heavy snow slides off the roof, we set them closer. Each hanger should screw into solid wood behind the gutter, not just into thin trim, or it can pull out under the first load of ice.
Should I choose 5 or 6 inch gutters?
It comes down to how much water your roof sends into each run. We measure the roof area that drains into each gutter, look at how steep it is, and recommend a size. Many houses are fine with 5 inch, while big or steep roofs do better with 6.
More services
You might also need.
- Gutters
Gutter Repair
Dripping seams, sagging runs and worn-out box gutters, fixed without replacing what still works. Learn more - Gutters
Gutter Cleaning
Leaves and roof grit cleared out, downspouts flushed, and photos of anything that needs fixing. Learn more - Gutters
Gutter Guards
Guards that keep leaves out and let the rain through, so the ladder comes out less. Learn more - Gutters
Downspouts & Drainage
New downspouts, extensions and yard drainage that carry roof water away from your foundation. Learn more




